Bartact Front Seat Cover Install (Side Air Bag Compatible)

[youtube https://www.youtube.com/watch?v=ZAGBTHysngs&w=640&h=360]

[ OVERCLOCK3D Jeeps | https://o3djeeps.com ]


This is the method for installing the Bartact (formerly TrekArmor) front JK seat covers. My covers happen to be side air bag compatible, because my seats have air bags. The process is exactly the same for non-airbag compatible Bartact seat covers - without the flap of course.

I find installation to be easy without using any aids such as tape or plastic bags. Feel free to use whatever method works best for you. The key is to rotate the seat as far forward as it will go to open the space between the bottom cushion and the seat back.

Tuscarora Trail - in 4x Speed

[youtube https://www.youtube.com/watch?v=W2g6jLu5jVA&w=640&h=360]

[ OVERCLOCK3D Jeeps | https://o3djeeps.com ]


This was as pretty intense trail. We started in low light fog conditions, and ended in night fog conditions. There were some pretty decent off-camber sections. You can see me getting spotted over the crux (hardest) section after about 7:40 into the video. Then, at about the 14:00 mark, you can see where I am being guided and winched over that same section in reverse...only this time in complete darkness. Lights were actually less valuable because of the heavy fog, so I found that driving with my DRLs (which happen to be my front turn signal lamps) made for the best visibility.