CPO Solder Tip (From 3rd Brake Light Video Comment)

[youtube https://www.youtube.com/watch?v=Og2FaC1GS5g&w=640&h=360]

[ OVERCLOCK3D Jeeps | https://o3djeeps.com ]


I had a question about how I soldered the wires for my third brake light, and since I didn't include that info in the video I figured I would make a quick video response to answer the question. I hope this is helpful.

Blizzard 2016 Drive Around

[youtube https://www.youtube.com/watch?v=7fBHd6Y642w&w=640&h=360]

[ OVERCLOCK3D Jeeps | https://o3djeeps.com ]


Out for a Saturday afternoon drive to find people that need help getting unstuck. I can usually find a few. This afternoon the roads were particularly bad...so nobody was out driving around...well...almost nobody.

CPO Blizzard 2016 Breaking Trail with TreadWright Guard Dogs

[youtube https://www.youtube.com/watch?v=KKRKmUAAJPM&w=640&h=360]

[ OVERCLOCK3D Jeeps | https://o3djeeps.com ]

CPO LED Third Brake Light How-To

[youtube https://www.youtube.com/watch?v=7WaTsjufPVk&w=640&h=360]

[ OVERCLOCK3D Jeeps | https://o3djeeps.com ]


This is the video that everyone has been asking for! This is the how-to for my 3rd brake lights on my 2015 Jeep Wrangler JKU. You don't have to do it the way I did, but it should give you a good idea on how to get started!

Here's what I used in my build:

LED Lights:
http://amzn.to/2x94cWC

Dust Shield:
http://amzn.to/2glkZve

and here is the waterproof connector I mentioned:
http://amzn.to/2xPwClA

Barricade Rock Sliders Installation (Long Arm Lift)

[youtube https://www.youtube.com/watch?v=Ozji0Pz51ok&w=640&h=360]

[ OVERCLOCK3D Jeeps | https://o3djeeps.com ]


This is a very quick install video for the Barricade Rock Sliders from Extreme Terrain. It really is as simple as pulling the body mount bolts, putting in the sliders, and re-torquing the bolts. I, however, have a custom long arm suspension which required a little extra modification. It was really easy, even with that. I don't think I mentioned this in the video, but if you do any cutting on the sliders, make sure you repaint any exposed metal to protect against rust.

Bartact Front Seat Cover Install (Side Air Bag Compatible)

[youtube https://www.youtube.com/watch?v=ZAGBTHysngs&w=640&h=360]

[ OVERCLOCK3D Jeeps | https://o3djeeps.com ]


This is the method for installing the Bartact (formerly TrekArmor) front JK seat covers. My covers happen to be side air bag compatible, because my seats have air bags. The process is exactly the same for non-airbag compatible Bartact seat covers - without the flap of course.

I find installation to be easy without using any aids such as tape or plastic bags. Feel free to use whatever method works best for you. The key is to rotate the seat as far forward as it will go to open the space between the bottom cushion and the seat back.

Tuscarora Trail - in 4x Speed

[youtube https://www.youtube.com/watch?v=W2g6jLu5jVA&w=640&h=360]

[ OVERCLOCK3D Jeeps | https://o3djeeps.com ]


This was as pretty intense trail. We started in low light fog conditions, and ended in night fog conditions. There were some pretty decent off-camber sections. You can see me getting spotted over the crux (hardest) section after about 7:40 into the video. Then, at about the 14:00 mark, you can see where I am being guided and winched over that same section in reverse...only this time in complete darkness. Lights were actually less valuable because of the heavy fog, so I found that driving with my DRLs (which happen to be my front turn signal lamps) made for the best visibility.