IT WORKED! Plasti Dip Pins on the Diabolical Slipstream to Prevent Rattles and Squeaks

[youtube https://www.youtube.com/watch?v=39L0QVmQ5yk&w=640&h=360]

This solved my squeaking problem and any rattling over bumps! Well worth the 15 minutes it takes to do this! I should have done it sooner.

🔔 Please CLICK THE BELL if you want to see my videos! 🔔

Rock Hard 4X4 Evap Skid RH4X4 RH-6005 for Jeep Wrangler JK

[youtube https://www.youtube.com/watch?v=sPgvvrY6zLw&w=640&h=360]

A quick and simple, for real this time, installation. :-)

ROCK HARD 4X4™ EVAPORATOR/CHARCOAL CANISTER SKID PLATE FOR JEEP WRANGLER JK 2/4DR 2007 - 2018 [RH-6005]

https://www.rockhard4x4.com/product_p/rh-6005.htm

RH4X4 FEATURES:
3/16" Thick Steel
100% Bolt on Install
Interlocking or Stand Alone
Black Powder Coat Finish
100% Made in USA
Lifetime Warranty

🔔 Please CLICK THE BELL if you want to see my videos! 🔔

Recreating This Jeep Girl's Instagram Poses

[youtube https://www.youtube.com/watch?v=VmoqO3mJyBU&w=640&h=360]

It all started because someone challenged us to recreate a photo in our Jeep club Facebook group... and well... the rest is history. Check out my instagram at https://www.instagram.com/o3djeeps/. Mike is at https://www.instagram.com/k9_krawler_md/

I hope it made you chuckle... or else I was penetrated for nothing!

🔔 Please SUBSCRIBE and CLICK THE BELL if you want to see my videos! 🔔

Rock Hard 4X4 Transmission Crossmember - RH-9061 - Install & Factory Removal 2015 Jeep Wrangler JK

[youtube https://www.youtube.com/watch?v=YiLd8rEcUts&w=640&h=360]

I finally got around to replacing the beat up factory transmission crossmember on OVERCLOCK3D. I wanted to do this before putting on the other skid plates... so as you can guess... those are coming soon!

🔔 Please SUBSCRIBE if you want to see my videos! 🔔

From: https://www.rockhard4x4.com/product_p/rh-9061.htm

ROCK HARD 4X4™ DOUBLEWALL TRANSMISSION CROSSMEMBER FOR 3.6L JEEP WRANGLER JK 2/4DR 2012 - 2018 [RH-9061]

Rock Hard 4x4 is very proud to offer the Heaviest Duty Transmission Crossmember for the Jeep Wrangler JK 2/4DR 2012 - 2018 3.6L.

Upgrade your factory 14-gauge stamped steel transmission crossmember to our 3/16" + 3/16" MASSIVE 3/8" DoubleWall Crossmember!

Total Weight: 27 lbs.

Our top and bottom plate 3/16" thick design gives you a total of 3/8" plate steel strength! Designed to fit 2012-2018 3.6L engines.

Ease of Install
In under 1 hour - including removal of your factory crossmember - you can complete this critical upgrade. We designed this crossmember to be a drop in replacement for your factory transmission crossmember. Simple hand tools required - no drill cutting or welding!

Precision Made Strength
Each crossmember is laser cut from 3/16" thick steel and coated in our weather and debris resistant powder coat finish. Strength is proven on virtually all Jeep enthusiast forums with glowing reviews. Since 2007 our skid plate system has been the undisputed leader in undercarriage protection.

Components
RH4x4 crossmembers are very recognizable for two major reasons: beefy unmatched strength and laser precision fitment. What makes up a RH4x4 crossmember is what makes it so strong.

Powder Coated Finish
Other crossmembers on the market come bare steel adding an unexpected and unfortunate setback. Ours comes ready to install right out of the box.

Thermostat Housing Replace and Bleeding Air from Cooling System - 2015 Jeep Wrangler JK 3.6L

[youtube https://www.youtube.com/watch?v=k4XEUc8fdRg&w=640&h=360]

It's time to take care of that leak! I wanted to do this before the Moab trip, and I'm running out of time. So, today was the day! In this video, I change out my thermostat and housing assembly. I didn't drain the radiator for this, and then I show how I bled the air out of the cooling system with help of a spillproof funnel.

🔔 Please SUBSCRIBE if you want to see my videos! 🔔

Here are the parts I mentioned:

EPAuto Spill Proof Radiator Coolant Filling Funnel Kit:
https://amzn.to/2MJad4f

MOPAR 5184651AH - OEM Part - Thermostat and Housing:
https://amzn.to/2o28CbK

Here's what MY manual says about the coolant I need:

MS-12106 OAT (MS-90032)

The engine cooling system must be protected
with a high-quality antifreeze coolant to provide
proper corrosion protection and to protect
against engine overheating. A solution of 50%
OAT (Organic Additive Technology) coolant that
meets the requirements of Chrysler Material
Standard MS-12106 and 50% water is recommended.
Refer to “Maintenance Procedures” in
“Maintaining Your Vehicle” for proper coolant
selection.

MAKE SURE YOU KNOW WHICH COOLANT YOUR SPECIFIC YEAR NEEDS. It's confusing I know. Check your owners manual!

SOLVED! Popping out of Gear after Body Lift - Project 2004 Jeep TJ Wrangler

[youtube https://www.youtube.com/watch?v=1XR0dz3-7GY&w=640&h=360]

I simple fix for a simple problem. I hope this helps you if you have a similar issue.

🔔 Please SUBSCRIBE if you want to see my videos! 🔔

Using Power Tank Nitrogen Shock Inflator and Regulator to Fill my King Piggyback Shocks

[youtube https://www.youtube.com/watch?v=XwFKURYwfaM&w=640&h=360]

Here's a video showing my process for topping off the nitrogen on my King shocks. It's easy to forget that these higher end shocks require maintenance!

🔔 Please SUBSCRIBE if you want to see my videos! 🔔

https://powertank.com/collections/shock-inflators/products/sig-5700

Shock Inflator with Gauge from Power Tank. Get a professional shock inflator tool at an affordable price. Our Shock Inflator has quickly become the industry favorite shock service tool. We designed it with features that others do not have like true USA made No Air Loss (NAL) chucks that do not leak because even the smallest leak can cause you to pull out your hair trying to get the exact shock pressure.

We attach this to a very supple high pressure air hose so getting the NAL chuck on that hidden schrader valve is easier. The hose is attached to an ergonomically shaped machined aluminum grip with our own micro adjust air valve. A durable and accurate gauge is mounted atop the grip.

Steve recommends you get the Power Wrench (CO2-Wren) to make installing and removing the NAL chuck easier. Just connect your N2 to the bottom of the grip, attach the NAL chuck on your shock, open the red micro valve adding just the amount of pressure, remove the NAL chuck and move on. Easy.

If you have IFP (internal floating piston) shocks that fill with a needle we have them (SIG-5000) and they work well with all of our shock inflators.

Details:

300 psi Digital Gauge or 500 psi Liquid Analog
No Air Loss chuck
3 foot HP line
Includes EVA protective case

67 Designs Nano Carbon Fiber Arm, Mag Mount G2, and a Cool Patch

[youtube https://www.youtube.com/watch?v=cOsquFNaEaE&w=640&h=360]

Added some more 67 Designs awesomeness to the Jeep!

🔔 Please SUBSCRIBE if you want to see my videos! 🔔

https://www.67d.com/collections/the-magmount/products/universal-magmount-g2-device-holder-for-android-ios-and-other-devices

MagMount G2 Device Holder for Android, iOS and other Devices

BENEFITS

Lower profile with 50% less volume than the previously available G1.
Increased the staying power by at least 20%.
Improved replaceable silicone cover.
'Drop-on/pull-off' design for very fast, easy holding of any device.
Shallow profile made of lightweight aluminum with 20mm ball.
Attaches to the fixed arms from the (CF) Carbon Fiber Series
PRODUCT DETAILS
(CF) Carbon Fiber Series Universal MagMount G2 Device Holder for Android, iOS and other devices.
Utilizes a specially blended silicone surface designed for use with the stainless steel plate.
Comes with engraved stainless steel with 3M PSA to attach to device.
Arms and bases sold separately. Shown in images for example only.

See important notice below for details about magnets and devices.

Important for users of silicone cases - the plate does have very strong PSA to attach to a case/device, but silicone cases can be problematic based on the non-bonding properties of silicone! We therefore recommend not using this product with silicone cases.

Not recommended for heavy off-road and high-impact trail driving.

Important Notice: This magmount contains a permanent magnet. It is highly recommended you do not use this magmount with a 3rd party device case that incorporates a place to store credit cards or other cards sensitive to magnets. Apple and other devices almost always contain sensors that can be sensitive to magnets. An example is the magnetic compass sensor. This 67 Designs magmount has been tested in real-world conditions for many months with Apple iPhone 6 and 6 Plus products in official Apple cases with the stainless steel plate attached to the back of the case. No interference with the operation or use of the devices was observed. The Maps navigation app on the phone worked just as well with this magmount as when the device was attached to the vehicle without a magmount. If you have any concerns about any potential damage to your device DO NOT order this product. If you have previously purchased this product and you observe any issues of any kind, immediately stop using this product and report - with details - the situation to 67 Designs Customer Service.

How I Lined my Tuffy Security Containers Adhesive Backed Felt and Foam Sheets

[youtube https://www.youtube.com/watch?v=LWvrgDHbNaE&w=640&h=360]

🔔 Please CLICK THE BELL if you want to see my videos! 🔔

Starter Replace and How I Test for a Bad Starter - Project 2004 Jeep Wrangler TJ

[youtube https://www.youtube.com/watch?v=bcqG9rQHC7M&w=640&h=360]

I got the dreaded "the Jeep won't start" call from my son this afternoon. Hey, stuff happens, and it's not a big deal. I'm just glad it failed to start at home, where it was easy to work on. Here's my process of troubleshooting to determine it was the starter... and then the quick and super easy replacement.

🔔 Please SUBSCRIBE if you want to see my videos! 🔔