🔔 Please CLICK THE BELL if you want to see my videos! 🔔
If you installed the TMR Customs Delrin Hinge Liners like I did, or made any similar modification, you may find your door striker is out of alignment with your latch. This is an easy fix. Here's how.
Sunday, May 20, 2018
Adjusting Jeep Wrangler Door Strikers after TMR Customs Delrin Hinge Liner Upgrade
[youtube https://www.youtube.com/watch?v=835RG_RzCHA&w=640&h=360]
Subscribe to:
Post Comments (Atom)
Thanks for the video. I just installed mine last week and noticed this mostly on the passenger front but now I'm going to adjust then all. Really appreciate it.
ReplyDeleteDid you use any lube on the hinges? Also do you get squeaking now? I changed mine out and honestly I’m not happy. I used emery cloth and sand paper to get door pins nice and smooth. My doors felt like they were on glass for a month maybe 2. Now they squeak and are stiff again.
ReplyDeleteAny tips for the rattle noise from the rear door after installing 33inch with aftermarket rims?
ReplyDeleteHopefaithguns I use white lithium grease
ReplyDeleteAmit Keret not sure where to start. Can you explain in more detail? Larger tires don't by themselves cause a door to rattle
ReplyDeleteo3djeeps [ OVERCLOCK3D Jeeps ] yeah :) when I drive on bumpy road I hear rattle noise if I look on the door I can see it moves a bit and make that noise, I understand it's a common issue but will be happy for a fix that dosent include replacing to HD carrier etc. Unless no option at all.
ReplyDeleteGot it. Use this same method to raise the striker on the door that is making noise. You should be able to adjust it to remove the rattle by putting a little tension on it.
ReplyDeleteo3djeeps [ OVERCLOCK3D Jeeps ] will try thank you
ReplyDeleteThanks for the tip!
ReplyDeleteYeah thanks a bunch for the tip. I have my Delrin inserts ready to go this week sometime. Thanks again
ReplyDeleteGood video. I have made this adjustment too but still can't get the doors to close correctly. I took my doors off and on a lot last year and I believe in doing so slightly bent the door hindge posts. Time to replace these too.
ReplyDeleteGood video. I have made this adjustment too but still can't get the doors to close correctly. I took my doors on and off a lot last year and I believe in doing so slightly bent the door hindge posts. Time to replace these too.
ReplyDeletePerfect timing for this video as I just installed the Delrin liners on my JK last week and was wondering why the door was not closing as it should . EZ fix ...thanks
ReplyDelete